Lagun Viaraible Speed Head

[CharlesM]

I have a Lagun 3HP variable speed head mounted on my Cincinnati No. 2CE Horizontal
mill. I am looking for a manual for this head. Does anyone have one or know where I might get one. I had to replace the belt and can't seem to get the speed concrol adjusted correctly.
Thanks,


------------------
Charles McGough
Sterlington, LA

[rockrat]

We have a Lagun, I will try to find the manual.

Hows this?


It doesnt tell ya much more than "Take it apart and put it back together". We normally time the spindle and adjust the speed indication disk to represent the rpm we calculate.

[This message has been edited by rockrat (edited 01-05-2005).]

[This message has been edited by rockrat (edited 01-05-2005).]

[CharlesM]

Thanks rockrat. This gives me a starting place.

CharlesM

[rockrat]

I have made this similar offer to others here. If you would like a copy on cd, I will see if the PM fellow at work scan it in (which needs done anyway) and I can get a copy out to you. Let me know.

[CharlesM]

I would like a copy on CD. I am at work at present. I will send you an e-mail from home with the address. I will be glad to reimburse you for any expence.
Thanks,


------------------
Charles McGough
Sterlington, LA