Announcement

Collapse
No announcement yet.

What type is it?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What type is it?

    I feel like such a newbie. I'm trying to figure out what type of camlock my lathe uses. There are three pins that are .625" in diameter that are spaced approximately 2.75" on center. I need this info so I can make an educated purchase on eBay for a collect chuck.

    Thanx ahead of time, Hal C.
    No matter where you go, there you are!

    Hal C.

  • #2
    Sounds like a common D1-4 to me.

    Comment


    • #3
      have a look here!

      http://shopswarf.orcon.net.nz/chuckmt.html

      John.

      Comment


      • #4
        Thanx guys for the help.

        Hal C.
        No matter where you go, there you are!

        Hal C.

        Comment

        Working...
        X