Announcement

Collapse
No announcement yet.

WTD: Vernon Shaper Literature and Vise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTD: Vernon Shaper Literature and Vise

    Does anyone have a manual, parts list or literature for a 12" Vernon Shaper? Just let me know what you have and what you want for it. I could also use a vise for the same shaper.

    Randy
    Do yourself a favor and see if your TV carrier has America One News Network (AONN). 208 on Uverse. It is good old fashion news, unlike the networks, with no hype, bias or other BS.

  • #2
    I am not sure but I believe the Vernon shaper was made by Sheldon Lathe. There is a Sheldon forum on Yahoo that might have a manual in the Files section. If not, you could certainly get some help there.
    Don Young

    Comment


    • #3
      Thanks, but a 12" Vernon and a 12" Sheldon Vernon have some major differences. I need a manual on the Vernon which predates the S/V
      Do yourself a favor and see if your TV carrier has America One News Network (AONN). 208 on Uverse. It is good old fashion news, unlike the networks, with no hype, bias or other BS.

      Comment

      Working...
      X