I ordered, received and installed the solenoid that Doozer pointed out on Ebay. Totally different model number, but it fits and works perfect.
...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
- 1 like
-
Thanks Sparky. I wasn't sure if your VFD was using the encoder to maintain programmed speed and then relaying the info to your controller. Yes, I know...
Leave a comment:
-
Sparky, I am with you. I can mill out any hole I will ever need. I have a 40k RPM 30 taper inline spindle for really tiny endmills. In reality,...
Leave a comment:
-
Sounds like a nice machine Sparky. I have seen a few machines that eliminated the varidrive- it seems like a good idea. Good thing nowadays is that...
Leave a comment:
-
Thanks Doozer. You are the best. I put an offer in on that solenoid and if the whole mechanical assembly doesn't work, hopefully the coils will.
...
Leave a comment:
-
I would love to. Do these valves come in standard hole patterns? They fit on a manifold that the hoses go into so the holes would obviously line up....
Leave a comment:
-
These are marked 24v, and I am using them with a commercial quality Meanwell 24vdc supply. The voltage is right on. I do find it odd that 2 of these...
Leave a comment:
-
Sparky, I looked up the Versa part number and came up with nothing. Best I can tell the part is: versa ksg 4232 6k3tc
I don't really know if I can...
Leave a comment:
-
Thank you. I have worked with Garolite before (milling only) and it does work decent....
Leave a comment:
-
Need Some Advice on Making a New Solenoid for Bridgeport
2 of the solenoids controlling the brake and speed on my BP CNC mill have gone open.
I need to make a new bobbin and wind new ones if possible....Last edited by polaraligned; 02-22-2021, 10:07 AM.
-
I don't see the need to put too much thought into this. iPhones are used to make some great videos on YouTube. Don't think 4k will give you a better...
Leave a comment:
No activity results to display
Show More
Leave a comment: