User Profile

[ammcoman2]

I have one of these and it works well: https://www.kbctools.ca/products/sea...yword=RDE%2018

Geoff

[ammcoman2]

Re the 3 adjusters - each one has a tapered section that meets the scroll at a tangent so you have to back off two of them before moving the one required...

[ammcoman2]

On the Burnerd chucks the adjusters (3) move the scroll.

Geoff...

[ammcoman2]

Perhaps a photo of the chuck's adjusting pins will help. I have a Burnerd "set-tru" and do have the instructions for doing the adjustment. If...

[ammcoman2]

Both are fine but the second one is 3 phase - just what I have on my Myford ML7. IMO this is the ideal setup but you will have get a VFD which gives...