Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Right out of school, I worked as a design Engineer for a company that made phone line based remote meter reading equipment. Part of the job was to analyze...
-
I added coolant capability, which I rarely use:
...Last edited by ed_h; 05-12-2022, 08:06 PM.
- 3 likes
Leave a comment:
-
Hi, Prof.
Glad you're enjoying them. Battery project long done & came out OK. Thanks for asking.
Ed...
Leave a comment:
-
I re-wound my first motor recently. The only things I had to buy were the wire and some "fish paper", both found on Amazon.
Measure...
- 1 like
Leave a comment:
-
-
I've done this, and it works fine, but I found that even after the 24 hour JB cure time, I had to pre-bake the filled piece after sanding. If I didn't...
Leave a comment:
-
Well, it is a voltage divider, but the other resistor is the load itself. Dropping 24V to 5V with a 2K series resistor, the load would be 530 ohms or...
- 1 like
Leave a comment:
No activity results to display
Show More
Leave a comment: