User Profile

[doctor demo]

The first thing that jumps out at me is : How are you going to push that lathe back into place with all that rope
But on a serious note,...

[doctor demo]

[QUOTE=mechanica;n1883019]I can't afford anything else.
Its the only option by default./QUOTE]

Have you contacted Tormach about a lease,...

[doctor demo]

If you pull the trigger on option #1 , once the mill arrives it will be the last of your good sleep,and it might also be true for option #2 based on your...

[doctor demo]

Probably not the worst deal, but if you sourced the individual components local and didn't have to pay shipping it would probably save a few bucks....

[doctor demo]

Or, thread on the correct sized nut on the tap and hold it tight to the surface being tapped if you don't have a drill press and the right size bit....

[doctor demo]

I seriously doubt that you will be able to turn the o.d. with anything readily available. Grinding might be a better option.

Steve...