Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
That was long ago in a far away land! I am lucky that I even remember being there!...
-
-
-
Actually I believe that it did fly about 10 feet off the ground and about 100 yards!
Just enough to fulfill the requirements of the contract....
Leave a comment:
-
-
I have the owners manual with pictures of my markings but they are not full size!
I don’t want to keep the manual in the shop and have to refer...
Leave a comment:
-
-
Degreaser that Won’t Remove Markings
I have a Victor 1440B lathe and it appears that the markings that indicate spindle speed are threading pitch are some cheap silk screen ink!
There...
-
-
Lye is sold to consumers under many names and some very high prices!
I got taken because it was advertised as “septic tank friendly “!
...
Leave a comment:
-
-
Use coolant and be careful because titanium chips can spontaneously combust!
The little bit that I turned was little turning stainless steel....
Leave a comment:
-
-
Make the hub keyway .25” and then make the a key 5mm on one side and.25” on the other!
-
👍 3
Leave a comment:
-
-
Cobwebs Gone!
The temperature was in the 70s this morning and I was able to get into the shop and make a jig for fitting a barrel in a 1911 slide and I got it right...
-
👍 2
-
-
$2000 for a shop that doesn’t produce income for a person that gets $900/month SS doesn’t work!
I can wait for cooler weather for a lot less....
-
👍 1
Leave a comment:
-
No activity results to display
Show More
Leave a comment: