.png)
Yes incidental contact is allowed.
The screws are steel cap heads, and they are put in at about 10nM, not that tight, but come out much tighter,...
dr pepper
Senior Member
Last Activity: 03-19-2023, 09:59 AM
Joined: 10-12-2009
Location: Lancashire, UK.
-
Bolting up hot brass parts with cap head screws
A machine I'm repairing has hot brass heating irons that run at 250 degrees C, the bolts holding them in sometimes get so tight they break on removal,...Last edited by dr pepper; 03-16-2023, 10:26 AM.
No activity results to display
Leave a comment: