Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Never too cold for painting. 🙂
-
Thank you guys so much for the replies and input! I do grab the screenshot with filmora but then always transferred it over to paint for titling and resizing...
Leave a comment:
-
That is very good out of a gm product! We have 4-5 Chevy trucks and a couple cars over the years. Every single one of them like clockwork would shat out...
Leave a comment:
-
In what software? I looked and looked and tried different things and could not get an outline in paint. Unless I wrote out the text in one color in one...
Leave a comment:
-
Checking out a fuel pump on our chevy work truck today. I expected a bad pump. Thats not what I found!
...
Leave a comment:
-
I have a cheap USB camera I've used a few times but it is quite lacking. A YouTube guy I watch quite often uses a HF bore scope camera that he mentions...
Leave a comment:
-
I keep an oil soaked rag in a paint can with the lid just placed on top. Used motor oil. I do keep it on the end of the mill table so IF it ever started...
Leave a comment:
-
Like willy states, I am trying to avoid removing the tank. That will be my last resort here for now. From what I see in the tank I have good faith the...
Leave a comment:
-
Yes that would do great I am sure. But what about all the plastic and rubber still in and connected to the tank? What do I do with 17 gallons of acid...
Leave a comment:
-
The evaporust is on backorder they say because of demand. Estimated delivery is now Feb 1st. Frustrating....
Leave a comment:
-
I did cut half way threw lifting the car, I didnt think it was too bad but thank you very much for pointing that out! Thats the input I like to hear about...
Leave a comment:
-
New shenanigans! Couple quick little fixes on some cheap ebay exhaust on the civic.
...
Leave a comment:
-
Made up the "heater can" this afternoon. The idea is the fountain pump will pump evapo from the bottom of the gas tank up and into this can....
- Likes 1
Leave a comment:
-
Fountain pump. I also cut out a block off plate for the fuel pump side. I think I am going to use the fountain pump to pump into a container...
Leave a comment:
-
I honestly thought of that as well. I think I'll get a few cans of gas on hand with a light premix so I can fill the gas tank asap after I get all the...
Leave a comment:
-
I have everything I need. I have a small fountain pump I am going to throw in the tank to move the fluid around. I picked up a water heater element today...
Leave a comment:
-
When I store vehicles for winter or any long term I always completely fill the tank with fuel. Small engines I will completely drain the tank and dry...
Leave a comment:
-
Well, I assumed like any other tank I've cleaned, just constant use will be enough....
Leave a comment:
-
I am aware of the etch line it can leave at it's water line. I am not concerned with it leaving a line but I do want as much coverage as possible. I have...
Leave a comment:
-
No way to cut the floor open.
I feel like I should keep it warm somehow too. I can warm the shop but I feel a cattle tank heater may be best...
Leave a comment:
No activity results to display
Show More
Leave a comment: