Casting polyurethane question

[challenger]

I'd drill through it imo. You could hack saw from the hole center to the root as mentioned above. Ten minutes tops....

[challenger]

Actually the boring of the 14" long nylon went very well thanks, in large part, to advice I received here.

I do, however, feel like...

[challenger]

I ordered this. ...

[challenger]

I will be researching which product to use. I do need it to be somewhat hard but not necessarily as hard as the nylon I currently have. I also don't wish...

[challenger]

I will be researching which product to use. I do need it to be somewhat hard but not necessarily as hard as the nylon I currently have. I also don't wish...

[challenger]

This is what I was thinking of duplicating with polyurethane. I made one fluted roller of the dimensions you listed and proceeded to F up the second one....

[challenger]

I'm looking for advice on how to cast polyurethane. Anyone do much of this?
Thanks...

[challenger]

This is EXCELLENT information! Thanks.
I figured, for the $15.00, paid for it that I could somehow equip it with some useful bits and pieces. So...

[challenger]

So you are saying that you're polished, gem like, vise is the only way to go? Dude! Shaper manufacturers often supplied a vise with the shaper. Either...

[challenger]

This isn't for welding those types of studs used in body shops. Those stud welders, as you say are much smaller. I believe this type is used for welding...

[challenger]

I bought this stud welder for 15 bucks hoping I might be able make a spot welder. Anyone know about it or heard of it? The company seems to have gone...

[challenger]

Not selling....

[challenger]

Isn't paranormal? Oh my! Thanks goodness!...

[challenger]

Wow! Did I open a worm can? My bad😁

[challenger]

I know you are correct but I don't get it. These are low budget shapers not split window corvettes. I dare say that an original vise from a 7" Atlas...

[challenger]

Very true. It's an instinctual thing. Along the lines of the fact that we like seeing things as they are supposed to be. If there are straight line patterns...

[challenger]

Anyone have any ideas as to the value of an Atlas 7" shaper vise? I've done the flea bay search and don't see how these are being listed for these...

[challenger]

I have a bunch of router bits and I'll give a round over bits a look.
Thanks

[challenger]

Ok I have a good setup on the mill table. Placing the rod in a slot allows the 12 tooth gear to index with a single tooth and everything looks fine for...

[challenger]

Steal it from a school. They ain't using them....