.png)
Ummm, neural, it's not "excellent" if it won't hold the workpiece. BTW, welcome to the forum.
-js
Jim Stewart
Senior Member
Last Activity: Today, 02:40 PM
Joined: 11-04-2013
Location: SF Bay Area
-
Ah, yes. TTYs. At one point I could type on a model 28 (60 wpm model) at 59 wpm as measured by the sergeant grading my papers. Remember, at the end of...Leave a comment:
-
Nothing to boast about? C'mon - he's freely admitted that he's a Texan.
-js...Leave a comment:
-
Shouldn't there be a "whistle" in there someplace?
...
Last edited by Jim Stewart; 04-07-2020, 06:16 PM.Leave a comment:
-
Ah, I see now. Well, I'm going to be using this primarily for spraying on surfaces.
-jsLeave a comment:
-
Anything worth doing is worth doing to excess. - Edwin Land
If some is good, more is better, and too much is just right. - Parnelli Jones,...Last edited by Jim Stewart; 04-07-2020, 06:14 PM.Leave a comment:
-
Uh, don't follow you...
-jsLeave a comment:
-
Non-ionizing radiation is the lower end of the frequency spectrum up through light including UV. Ionizing radiation is X-rays and gamma rays, last time...Leave a comment:
-
Would the heat gun from a plastic welder be of use? HF has a cheap welding kit.
-jsLeave a comment:
-
...we shall see. Well, turns out that McMaster can't ship the gallon of isopropyl to California - VOC regulations (which, BTW, I'm firmly in favor of)....Last edited by Jim Stewart; 04-06-2020, 09:36 PM.Leave a comment:
-
What you want is a filament transformer. Go back 50 years and you'll find them.
-js...Leave a comment:
-
Very subtle, flathead. I read the article and (unless I missed something) there was no mention of the inverse-square law.
A few years back...Leave a comment:
-
Just now I placed an order with McMaster for a gallon of isopropyl and a 100-pack of isopropyl wipes. The wipes will take 6-8 weeks, but - if I read the...Leave a comment:
-
Yep. And you know how much weight to add - the magnets' weight. But instead of finding some other material for weights, why not just use the magnets?...Last edited by Jim Stewart; 04-04-2020, 08:13 PM.Leave a comment:
-
Roland, in the 57 years I've lived (and bought booze) in California I've never once seen everclear in a store.
-js...Leave a comment:
-
That would be Magnaflux. Works on steel crankshafts and rods too...
-js...Leave a comment:
-
Huh. From those specs #3 and #4 are essentially the same.
-js...Leave a comment:
-
I've tried to reuse old, brittle tiles. Didn't work. Floor/deck paint is the answer.
-js...Leave a comment:
-
Adhesive wheel weights, maybe...
-js...Leave a comment:
-
Plunger, don't you already have 3 phase in your shop? Seem to recall that you do. In which case you don't want an inverter, just a 3 phase transformer....Leave a comment:
No activity results to display
Leave a comment: