Need to Replace Liner in Wire Feed Welder

[DS_park]

Thank you Ironbearmarine and LKeith. Based on your advise I dug into the torch last night. Turns out the liner is permanently crimped to the gun connector...

[DS_park]

I acquired an almost new inverter Flux Core Wire Welder that has a blockage in the wire feed liner. Could also be a kink. Wire feed freely by hand from...

[DS_park]

This is a follow up as I purchased the Eastwood version and have been using it for a couple of weeks. I am fairly pleased with it.

Pros:...

[DS_park]

Clarification, responses.

Search Ebay for MIG 130 for the Item in question. Its not really a mig but an AC 50-120A flux wire feed welder....

[DS_park]

Particularly these days (and especially with the US Postal service in SE Michigan), I give a few extra days. In this case, its FedEx and the tracking...

[DS_park]

Need some advise on which way to go.

On Nov 15^th I ordered a cheap overseas flux welder off of eBay and for a few $$ more, chose a seller...

[DS_park]

The saw is for wood. Just found McMaster Carr sells steel adapters for about $2.70 apiece. I passed on a good new blade that was for 1" prior to...

[DS_park]

Than you for the drawing. With several options now I can find a blade regardless of its arbor size. How'd you guess I have been eyeing the fence for improvements?...

[DS_park]

I think my old 1948 Shop Smith (buried in my mom's garage out West since the 90's) used a piece of copper tubing as a centering arbor. Really have to...

[DS_park]

Yup, Rockwell Delta built like a tank. I inherited it a few years back, thought it was an 8" at the time. Had a good blade when I got it but have...

[DS_park]

I need some arbor bushings to be able to use table saw blades with 1” holes on a 5/8” arbor saw. (My saw uses the not so common 9” blades which...