Anyone done hot caustic bluing?

[junkaddict]

Had a Milwaukee M18 drill die after 3 years. The warranty is 5 years. I went online, filled out the repair order, i could not find the receipt, but it...

[junkaddict]

Great thread there too. Thanks....

[junkaddict]

That is what I am looking for. Thank you....

[junkaddict]

Going to give it a try. Want to black oxide some small parts. Seen people do it on YouTube, but no recipies. I have a fume hood, and plenty of safety...

[junkaddict]

I just did the one on my shower. When you replace the innards, you want kit RP77739. Get the Delta. The aftermarket ones suck, they are substandard Chinese...

[junkaddict]

Made a swing out shelf for my mig welder on the welding table I made a few months ago. It is higher up, and it makes it much easier to change the rolls....

[junkaddict]

That was my next project. The rope was just Cobbled together to see how it worked....

[junkaddict]

I drilled a 5/8 hole through the tubing and legs, and pressed in steel bushings, 5/8 od, 1/2 Id. The square tubing is 1/8" wall, so I pressed in...

[junkaddict]

Well, my back is kind of a mess, arthritis, bulging and blown disks, so I made a shelf and a swing arm to take the large milling vise on and off. Also...