Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Yes I agree that the thread shall not be within the joint as I stated the thread starts at the end of all pieces being put together not the end of the...
-
I am surprised no one has stated if there isn't enough of thread to tighten the bolt the bolt is to long
I have been a structural fabricator and...
Leave a comment:
-
Grizzly web page shows your mill with the DRO mounted it is a 3axis DRO
If you are going to install it your self it is not hard just take your...
Leave a comment:
-
I also have cut alum. On a table saw and also on a 16 " redial arm saw using a carbide tipped blade on each machine
I have cut everything from...
- Likes 1
Leave a comment:
-
Try contacting ENCO for a parts break down it may show you what is holding it in place such as a snap ring or dowel pin just saying it may save a lot...
Leave a comment:
-
As I'm looking at your pics why not mount the motor under the table the saw is mounted on and run the belt straight up to the pully then you can cover...
Leave a comment:
No activity results to display
Show More
Leave a comment: