OT. Removing stuck mini bike tire from rim

[bborr01]

I'm trying to salvage the tire to keep it original. A new pair is only $39 on Amazon and if it comes to having to ruin the tire I'll probably do what...

[bborr01]

I have an old 5hp minibike with a torque converter that all of the sudden started leaking air slowly from the rear tire. I pulled it off and checked and...

[bborr01]

I've tig welded a fair amount of tubing that wasn't structural or high load bearing by clamping it together nice and tight and then tig welding without...

[bborr01]

Around here tubing is whatever wall thickness you order....

[bborr01]

You said you are running it slow. Try turning up the speed. Carbide doesn't really like slow. It tends to chip the carbide. I still wouldn't expect it...

[bborr01]

No need to hand write a letter. I've disputed many charges over the years and never had any problems with the CC companies denying anything. Last week...

[bborr01]

I'd dispute the charges with the credit card company. Let them work it out with Amazon.

[bborr01]

I remember going to the store late one night about 30 years ago and they had just installed the yellow sodium lights in the parking lot. I was driving...

[bborr01]

I have a couple of Mitutoyo digital calipers that don't work and called them to see about getting them repaired and was told that they will fix them for...

[bborr01]

Two words. Water jet....

[bborr01]

I totally understand that a firefighter would prefer all tanks to be outside but I don't know anyone who keeps their torch set outside like you said....

[bborr01]

I've seen spare tanks stored in a cage outdoors but never seen anyone store their torch setup outdoors. I have a three oxy acetylene torch sets in various...

[bborr01]

A Mattel power shop definitely made a lasting impression on me when I was a young lad. Also a trip to the Henry Ford museum made quite an impression....

[bborr01]

A guy that I used to work with used a pellet pistol to shoot the wings off of flies. Just the air would rip their wings off. In kind of an odd way it...

[bborr01]

What about turnt? I hear kids use that once in a while....

[bborr01]

I used a wheeled cart and lowered the table until it was slightly resting on the cart then just cranked the handle until the lead screw was out of the...

[bborr01]

I have moved my Bridgeport by picking it up under the ram with no problems ever. Where I worked we had a couple of dozen Bridgeports and clones and our...

[bborr01]

Duplicate post.

[bborr01]

You may not know it but end mills can be used in horizontal or vertical mills. I've done so many times....

[bborr01]

I paid 25 for my vintage cast iron Craftsman 6x48 belt sander and thought I got a deal. You suck.