Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
I was my understanding the material for first reactor was made here up in Ames, Iowa at Iowa State University, in fact some scientist was awarded recognition...
-
darryl Here they call for a Locate and maybe you can call now to get it scheduled. They come out with detectors and mark all the lines before any digging....
Leave a comment:
-
Your vent pipe should be in your house not in the yard? Here in this part of the US they put a clean out pipe just outside the house, not always as I...
Leave a comment:
-
Your lucky the city is on to it, never would happen here. Problem here is that stinking Orangeburg stuff, once they went to PVC with glued joints everything...
Leave a comment:
-
Upgrade the OEM Windows 10 Home that came on that laptop and purchase Windows 10 Pro, not the upgrade from Dell or HP. You can turn off the constant upgrades...Last edited by wmgeorge; 01-22-2021, 03:04 PM.
- 1 like
Leave a comment:
-
Its possible that you have a collapsed sewer line. But I would rent either a powered auger with a root cutter or call a real sewer cleaning service. Back...Last edited by wmgeorge; 01-21-2021, 11:26 AM.
Leave a comment:
-
Yes more designs than what I posted the picture of, but more or less the same thing you could recognize. OP post was a tool for a lathe...Last edited by wmgeorge; 01-20-2021, 08:45 PM.
- 1 like
Leave a comment:
-
I know lots of folks running CNC on Windows 10 Pro who never allow updates.... they never have those computers online. My shop computer never goes online...Last edited by wmgeorge; 01-20-2021, 02:21 PM.
Leave a comment:
-
-
Hmm, never had an issue finding drivers for Windows 10, go online and it finds and installs. What could be simpler? Using Windows 10 Pro its easy to put...
Leave a comment:
-
I have the purchased versions of Windows 10 not the Free upgrade one. With Pro I can hold off updates nearly forever. Tried Linux a couple times and it...
Leave a comment:
-
Jim the only thing stopping me from being an Extra Class was 20 wpm. I was lucky to do 13! I would love to get back into HF but I am too old to climb...
Leave a comment:
-
BS That diagram or drawing is correct and shows how little you know about antennas ,it came directly from the ARRL website and shows a working...
Last edited by wmgeorge; 01-18-2021, 05:55 PM.
Leave a comment:
-
I am sorry Sparky I did not watch your video my comments are from experience . Industrial Electrician is one thing , Master is another. Its clear however...
Leave a comment:
-
Very simple don't make long runs. When wiring those new CNC presses we ran conduit. The shielded cable only ran a few feet exposed ....
Leave a comment:
-
We could go back and forth for weeksbut the simple fact, If I ran a long wire antenna and grounded it at the transmitter end to a ground rod using...
Last edited by wmgeorge; 01-18-2021, 03:11 PM.
Leave a comment:
-
I was licensed in 1978, Advanced Class back when you needed to know something. Also a retired Master. Are you confusing ground with ground plane for an...Last edited by wmgeorge; 01-18-2021, 10:26 AM.
Leave a comment:
-
Back on topic, the equipment or shield ground is not the DC - ground. It could be, but in some cases your told not to mix the two. In other words the...Last edited by wmgeorge; 01-18-2021, 09:05 AM.
Leave a comment:
-
Simple. The machine has a common equipment ground, and its not the circuit board. DC ground is a return circuit path, equipment ground is the machine...Last edited by wmgeorge; 01-17-2021, 07:37 PM.
Leave a comment:
-
Here is results of a Search on Amazon for 2 Conductor shielded cable and you never use the shield for anything but... well a shield grounded at one end...
Leave a comment:
No activity results to display
Show More
Leave a comment: